Question not answered? Contact us via our 'Contact' page.



Trex Composite decking offers you superior durability far superior to any other timber decking that you can buy right here in Perth. Trex Composite decks are stain and scratch resistant, they will not rot, splinter, they are mould resistant, and there is never a need for staining or painting. The superiority of Trex Composite decking lies in the high performance shell that encloses the three exposed sides of the Composite deck, and the exposed underside which allows each deck to breath. Creating a superior product that braves all weather conditions.  The Composite decking is made from 95% recycled materials, making Trex Composite decking not only luxurious and resilient, but the environmentally friendly choice you can feel great about.

Trex Products are made to meet the highest quality standards, and when you purchase a Trex product you are buying international quality goods. Whether it is luxurious Composite decking, Trex Screening, Cladding, or Trex® Outdoor Furniture™, you will make great savings due to the low maintenance requirements required across the whole range of the Trex Products we offer right here in Perth. With Trex Products there is no need for expensive chemical treatments, sanding, painting, sealing, and other laborious tasks required to maintain wood decking. The end result is Composite decking of the highest quality from Trex the worlds #1 in Composite decking.

Early generation Composite Decking

Early generation wood-plastic Composites, represented a breakthrough in the decking industry. They required a considerable lower standard of maintenance, they never had to be stained and did not rot, wrap like wood. Although, early generation Composite decking achieved leaps and bounds in decking innovation, they were not stain, scratch or mould free. They also require periodic cleanings with composite deck cleaners. If you own an early generation Composite deck, we supply an environmentally friendly cleaner called Corte*Clean® to help maintain your Composite deck. Please see Composite Cleaner page for more information.

Third Generation Composite Decking

WCT Distributors here in Perth only supply Trex’s high performance third generation Composite decks.  Third generation Composite decks are manufactured with a high performance shell that wraps around each Composite board to protect it from the elements, providing resistance to fading, staining, scratching and mould. In addition third generation Composite decks provide:

  • Cost effective maintenance: Third generation Composite decks unlike first and second generation Composite decks do not require Corte*Clean® to maintain their sheen. All that is required to maintain your Composite decking is the occasional cleaning with soap and water.
  • Enhanced aesthetics: Trex’s Transcend® Composite decks come in four high definition tropical colours: Spiced rum, Lava Rock, Tiki Torch, and Island Mist. Whereas, Trex’s Contour® decking comes in two exquisite colours: Pebble grey, and Honey Brown.

You can get product samples from our office at 1/20 Macadam Place, Balcatta WA, contact us for more information.

Trex decking requires far less maintenance than wood decking, but like any other thing dust and dirt build up over time. So to maintain your deck some form of periodic cleaning is required to keep the deck looking brand new for decades. Trex third generation Composite decking simply requires a simple soap and water cleaning. If you own one of the early generation Composite decks, you require periodic cleanings with composite deck cleaners. If you own an early generation Composite deck, we supply an environmentally friendly cleaner called Corte*Clean® to help maintain your Composite deck. Please see Composite Cleaner page for more information.

A pressure washer with no greater than 3100 psi***** that has a fan attachment/adjustment and soap dispenser may be used to remove dirt, concrete dust, or other types of construction dirt. Spray deck with soap, and then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using fan tip no closer than 8” from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, this will cause a film to remain on the decking surface.  Use of a pressure washer greater than 3100 psi could damage the boards and void the warranty.

You should never Sand a Trex Composite Deck. Sanding will damage the protective sealing around the Composite deck, and will void the warranty with respect to any conditions caused by sanding.

Trex high-performance decking (Trex Transcend and Trex Contour) can be power washed. Use only a fan tip and up to a 3100 psi power washer to remove dirt and debris. The fan tip should be no closer than 8 inches (20.4 cm) away from the protective shell during use.

On one of Perth’s hot 40 degree days, nearly any surface will get uncomfortably hot, and it would only be wise to wear a pair of shoes if you planned to walk on them. In extensive studies conducted by Trex, it has been found that the colour of a decking board, regardless of whether it is made of wood-plastic composite or wood, will retain heat due to the wood component of each deck. Trex Composite decking tends to retain a bit more heat than ordinary wood decking.

Trex Composite decking has been manufactured with durability, and longevity in mind. The durability of these Composite decks makes them suitable for both commercial and residential settings.  Here in Perth many business and organisations have chosen Trex as their go to decking. You can find Trex composite decks at Curtain University and at the King Edward Memorial Hospital.

Grooves can be cut into the side of Trex decking by using the TREX GROOVE Cutter, which then allows you to use the Trex Hideaway® Hidden Fastener system. The Hidden Fastener system allows for deck instillation without visible screw heads on the surface of the boards. For greater convenience, we also offer Groove edged boards which are boards which come pre-grooved, ready to install the Trex Hideaway® Hidden Fastener system.

Trex Composite decks can be ripped to reduce the width of the board. However, a Composite board should never be ripped to reduce thickness. Please see the Trex installation instructions for more information on how to install Trex boards without voiding your warranty.

Glue cannot be used as a primary fastener. When using Trex Fascia, glue can be used as a secondary fastener – see Fascia instructions in the Installation Guide for more details.

Trex composite boards can only be installed over a solid surface using a sleeper system. Please see the sleeper system guidelines in our Installation Guide

Trex third generation Composite decks come with an unyielding, high-performance shell. The high performance shell works to ensure that your Composite deck retains its high definition colour and, keeps your deck free of splinters, rotting, and insect damage. Due to the protective shell Trex Composite decking should not be painted or stained, as there is no need for these time consuming tasks.

    • Trex’s RainEscape system protects the structural integrity of your composite deck
    • It is easy to install, and can be installed on an existing deck
    • Trex’s RainEscape system is made our of rugged plastic and ultra violet inhibitors, making it durable and perfect for Perth’s hot summer heat
    • Trex’s RainEscape system allos you to create an indoor environment under your outdoor decking. Which means you can enjoy your decking to the max by installing features that will be resistant to the elements. Trex Composite deck owners have been able to install the following features thanks to the Trex’s RainEscape system:
      • Speakers
      • Video electronics
      • Furniture And much, much more

Trex boards are co-extruded with a high performance polymer shell or coating. The coating is engineered to be scratch and abrasion resistant, making Trex boards perfect for extremely high levels of commercial or residential foot traffic. Trex prides its self on wear resistance of each Trex board. They  conduct extensive in house testing to ensure that Trex boards are both scratch and abrasion resistant.